Example System / Case Management FAQ
What is case state "REQ_ONVIF"
What does this state mean
The device has been determined to be an IP camera, and our R&D needs information regarding certain aspect of ONVIF function support. Genius Vision software support advanced ONVIF functions, and our first choice of camera integration would be ONVIF.
You will be given 4 choices for each support information item, as described as follows.
- Yes - The function is known to fully support desired function.
- No - The function is known not support the desired function.
- Partial - The desired function is supported to certain level, but not fully supported.
- Unknown - The support information of the desired function is not available yet.
You may provide the choice base on the best of your knowledge. The more accurate information we have, the better our R&D can decide how, if, when we are to integrate such camera.
The list of all ONVIF support information items are:
Item |
Title |
Description |
1 |
Pull point styled event subscription |
Can the camera support Pull point styled event subscription? Both CreatePullPointSubscription and PullMessagesRequest commands must be supported correctly. |
2 |
DeviceIO input/relay output commands |
Can the camera support I/O input/relay output control and event? All of the following commands must support I/O function: CreatePullPointSubscription, PullMessagesRequest, GetDigitalInputs, GetRelayOutputs, SetRelayOutputSettings, SetRelayOutputState |
3 |
Imaging settings |
Can the camera support imaging properties configuration? All of the following commands must support imaging function correctly: GetOptions, SetImagingSettings |
4 |
Video encoder settings |
Can the camera support video encoder properties configuration? All of the following commands must support imaging function correctly: GetVideoEncoderConfigurationOptions, SetVideoEncoderConfiguration |
5 |
Basic PTZ commands |
Can the camera support PTZ commands? All of the following commands must support PTZ function correctly: ContinuousMove, GotoPreset |
6 |
MotionAlarm event |
Can the camera support event according spec 5.3.2 MotionAlarm? |
7 |
Video analytics - Cell Motion Detection |
Can the camera support video analytics function according to spec B. Cell Motion Detection? |
8 |
Video analytics - Declarative Motion Detector |
Can the camera support video analytics function according to spec A.4 Declarative Motion Detector |
9 |
Extended imaging events |
Can the camera support following extended imaging event according spec? 5.3.1 Tampering, 5.3.1.1 ImageTooBlurry, 5.3.1.2 ImageTooDark, 5.3.1.3 ImageTooBright, 5.3.1.4 GlobalSceneChange, 5.3.1.5 SignalLoss |
10 |
Extended video analytics functions |
Can the camera support following extended video analytics function according to spec: A.1 LineDetector, A.2 Field Detector, A.3 Loitering Detector, A.5 Counting Rule |
See also
Internal notes for staff
(to be written)